| Id |
0 |
| sku |
B07YM8TJ8R |
| title |
8327GF41 - Liquid Thermal Gap Filler Silicone |
| description |
|
| product_type |
|
| specification |
|
| url |
https://www.amazon.com/dp/B07YM8TJ8R?language=en_US&psc=1 |
| amazon_categories |
Industrial y Scientific, Adhesives Sealants y Lubricants, Caulk, High Temperature Caulk, |
| cbt_categories |
|
| brand |
MG Chemicals |
| model |
|
| pictures |
https://images-na.ssl-images-amazon.com/images/I/41E8GzX5KVL.jpg |
| price |
46.95 |
| available_quantity |
10 |
| upc |
|
| product_id |
|
| variant_id |
|
| parent_id |
|
| unit_dimensions |
cm |
| large |
2.54 |
| width |
2.54 |
| height |
2.54 |
| unit_weight |
kg |
| weight |
0.25 |
| merchant |
Amazon |
| flag_active |
1 |
| system_user_created |
2019-10-22 10:08:52 |
| system_user_updated |
2021-01-28 17:51:54 |
| system_user_deleted |
2019-10-22 10:08:52 |
| idCatMeli |
147 |
| Categoria_Meli |
CLC007 |
| title_spanish |
8327GF41 - Liquid Thermal Gap Filler, Silicone |
| description_spanish |
8327GF41 LIQUID THERMAL GAP FILLER, SILICONE is a two-component, flame retardant, thermally conductive silicone gap filler. It is a smooth, non-sagging paste that stays firmly in place after being dispensed. The cured product creates a thermal path that efficiently dissipates heat from electronic devices. It retains its softness after curing which maximizes stress relief during thermal cycling. 8327GF41 can be used as a liquid alternative for prefabricated solid thermal pads. If lower viscosity is required, use 8327GF25. For Use With: a) Pneumatic Dispensing Equipment b) MG Cat. #8DG50-1-1 Dispensing Gun and Cat. #8MT-50 Mixing Tips for dispensing Gun Application Instructions: Read the product’s SDS before using it (downloadable at www. mg chemicals ). Cartridge To insert the cartridge in the gun (MG 8DG-50-1-1), see the Dispensing Accessories Application Guide. 1. Twist and remove the cap from the cartridge. Do not discard cap. 2. Dispense a small amount to ensure even flow of both parts. 3. (Optional) Attach a static mixer. a. Dispense and discard 5 to 10 mL of the product to ensure a homogeneous mixture. b. After use, dispose of static mixer. 4. Without a static mixer, dispense material on a mixing surface or container, and thoroughly mix parts A and B together. 5. To stop the flow, pull back on the plunger. 6. Clean nozzle to prevent contamination and material buildup. 7. Replace the cap on the cartridge. Cure Instructions: Allow to dry at room temperature for 24 hours, or after letting sit for 5–10 minutes, cure the gap filler in an oven at one of these time/temperature options: 50 minutes @ 70 ˚C 25 minutes @ 100 ˚C. Store between -10 and 40 ˚C in a dry area, away from sunlight (see SDS). |
| status |
5 |
| flag_valid |
1 |
| flag_ripley |
2 |
| batch_num |
2020062508191830.190.235.174.227.UPD |
| batch_identifier |
|